Bermad Electric Pressure Reducing Valve

Bermad Electric Pressure Reducing Valves are typically used to on spray/sprinkler systems to ensure the sprinklers have a consistant throw regardless on the mainline pressure. The mainline pressure will usually fluctuate in a system due to elevation changes or pipe flow pressure losses . The electric control requires only between 2.5W and 10W of electrical power and there are a large range of with voltage options including 12VDC, 12VAC, 24VDC, 24VAC, 110VAC, 240VAC. This makes them ideally suitated to applications where there are a large number of valves run as part of a single control system such as stockpiles spray systems, haul road spray systems and dust control systems. The low power requirements allow the use of decoder type control systems making installation and maintenance much easier.

Bermad Electric Valves come in a range of models. The following is a brief summary of the models used in mining applications. The 400 Series is the most common:
  • 400 Series: Coated Iron, PN16, 40mm - 80mm threaded, 50mm to 400mm flanged
  • 100 Series: Glass-Filled Nylon, PN10, 40mm - 80mm threaded, 80mm to 150mm flanged
  • 300 Series: Glass-Filled Nylon head (body material depends on size), PN10, 40mm - 80mm threaded
  • 700 Series: Coated Iron, PN16 & PN25, 40mm - 80mm threaded, 50mm to 500mm flanged

If you have a particular application you would like us to discuss, require project pricing or would like more information on any of the products in this section then please send an email to